Fire Nozzle – Attack 500 CAFS Nozzle

Made in the UK

The Delta Attack 500 CAFS nozzle is designed for use with compressed air foam in conjunction with a CAFS system.

7 BAR NFPA MODEL – LOW PRESSURE

Inlet: 2 1/2″ Instantaneous Male (alternatives available)

Flow Type: Constant Flow

Flow Settings: Up to 500 LPM (132 GPM)

Add to Quote
This pistol-grip nozzles has a stainless steel ball valve for smooth ease of operation via a fully controllable on/off stirrup handle. Fully hard black anodized for maximum corrosion protection the CAFS nozzle has a fixed-stream jet barrel and silencer to reduce noise levels, particular effective during initial use. Originally used for wildfire woodland firefighting CAFS foam has also proved highly advantageous in structural fire scenarios and is now commonly used to suppress car fires, skip fires and waste fires. With enhanced ‘first-attack’ capabilities CAFS foam rapidly knocks down the fire allowing first-responding fire crews to improve fire conditions in advance of back-up personnel arriving on scene. CAFS foam also has the ability to effectively ‘stick’ to both horizontal and vertical surfaces thanks to its ‘shaving-foam’ like properties allowing maximum moisture penetration. Less water is also needed using the CAFS nozzle which is a major advantage where water is a limited resource. The Attack 500 CAFS is supplied as standard with a detachable silencer. Also available as an optional extra is the CAFS Lance and Jet/Spray attachment. The CAFS lance is available in either 0.5m, 1.0m or 1.30m lengths and incorporates a multi-directional stainless steel spray tip ideally suited for penetration into inaccessible areas such as roof spaces, car windows, skips etc. The Jet/Spray attachment provides the ability to incorporate CAFS performance with conventional jet/spray techniques. The Attack 500 CAFS fire nozzle is available with any International inlet adaptor.

Description

This pistol-grip nozzles has a stainless steel ball valve for smooth ease of operation via a fully controllable on/off stirrup handle. Fully hard black anodized for maximum corrosion protection the CAFS nozzle has a fixed-stream jet barrel and silencer to reduce noise levels, particular effective during initial use. Originally used for wildfire woodland firefighting CAFS foam has also proved highly advantageous in structural fire scenarios and is now commonly used to suppress car fires, skip fires and waste fires. With enhanced ‘first-attack’ capabilities CAFS foam rapidly knocks down the fire allowing first-responding fire crews to improve fire conditions in advance of back-up personnel arriving on scene. CAFS foam also has the ability to effectively ‘stick’ to both horizontal and vertical surfaces thanks to its ‘shaving-foam’ like properties allowing maximum moisture penetration. Less water is also needed using the CAFS nozzle which is a major advantage where water is a limited resource. The Attack 500 CAFS is supplied as standard with a detachable silencer. Also available as an optional extra is the CAFS Lance and Jet/Spray attachment. The CAFS lance is available in either 0.5m, 1.0m or 1.30m lengths and incorporates a multi-directional stainless steel spray tip ideally suited for penetration into inaccessible areas such as roof spaces, car windows, skips etc. The Jet/Spray attachment provides the ability to incorporate CAFS performance with conventional jet/spray techniques. The Attack 500 CAFS fire nozzle is available with any International inlet adaptor.

Related Products

Hydroshield Nozzle
  • Fire Nozzles
Fire Nozzles – De-Icing & Anti-Icing Nozzles
  • Fire Nozzles
Fire Nozzle – DM600 Automatic
  • Fire Nozzles
Fire Nozzle – Attack Pro-Series LX Foam Tube
  • Fire Nozzles

FAQs

The DELTA FIRE Attack 500 CAFS nozzle is specifically designed for use with compressed air foam systems, delivering high quality foam for rapid fire suppression. It is widely used across wildfire, structural, vehicle, and waste fire scenarios where fast knockdown and surface coverage are essential.

Unlike standard water nozzles, the Attack 500 CAFS is engineered to handle aerated foam, preserving its structure and performance. It features a fixed stream jet barrel and is optimised to maintain foam consistency, including improved adhesion to surfaces and reduced breakdown during application.

CAFS provides rapid fire knockdown with enhanced first attack capability, allowing crews to improve fire conditions quickly. The foam “sticks” to vertical and horizontal surfaces, increasing moisture penetration and cooling efficiency, while using significantly less water which is critical where supply is limited.

The Attack 500 CAFS nozzle is a low pressure model, designed to operate at around 7 bar in line with NFPA configurations, ensuring effective foam delivery while reducing nozzle reaction and improving handling.

Our Reviews

Powered by

Whether you need advice or solutions or just have a question, get in touch.

Environmentally
responsible
manufacturing

Innovative
technology
and automation

Trusted
and proven
products

Get in touch with our team.

Step 1 of 2
Name

Whether you need advice or solutions or just have a question, get in touch.

Environmentally
responsible
manufacturing

Innovative
technology
and automation

Trusted
and proven
products

or send us an email:

sales@deltafire.co.uk

Step 1 of 3
Name

Whether you need advice or solutions or just have a question, get in touch.

Environmentally
responsible
manufacturing

Innovative
technology
and automation

Trusted
and proven
products

or send us an email:

export@deltafire.co.uk

Step 1 of 3
Name